Specification:Auto Tracking Window, 85to265VAC,50/60HZ

Accuracy:±0.5%, Output: 4~20mA/Pulse

Small bore sensor(below 2In):Pair of UTXDR with Clamping,

a transmitter-receiver part, Cable:7m(2pair), 2flying lead for use with AT868

MAKER:GE PANAMETRICS

Applications
The AquaTrans AT600 flowmeter is a complete
ultrasonic system for the measurement of:
• Potable Water
• Wastewater
• Sewage
• Discharge water
• Treated water
• Cooling and heating water
• Irrigation water
• Other industrial fluids
Features and Benefits
• Economical non-intrusive flow
measurement
• Extremely simple setup and installation
• Suitable for a wide range of pipe sizes and
materials
• Suitable for lined pipes
• Velocity, volumetric, and totalized flow
outputs
• Clamp-on installations
• Permanent solid couplant for clamp-on
applications.

Overall Operation and Performance
Fluid Types
Liquids: acoustically conductive fluids, including most
clean liquids, and many liquids with small amounts of
entrained solids or gas bubbles
Flow Measurement
Patented Correlation Transit-TimeTM model
Pipe Sizes
• 2 to 24in (50 to 600mm) standard
• Other sizes available upon request
Pipe Materials
All metals and most plastics. Consult GE for concrete,
composite materials, and highly corroded or lined
pipes.
Accuracy
• ±1% of reading in application
• ±0.5% in field calibration
Installation assumes a fully developed, symmetrical flow
profile (typically 10 diameters upstream and 5 diameters
downstream of straight pipe run). Final installation
accuracy is a function of multiple factors including fluid,
temperature range, pipe centricity, and other.
Calibration
All meters are water calibrated and delivered with a
traceable calibration certificate.
Repeatability
±0.2% of reading
Range (Bidirectional)
-40 to 40 ft/s (-12.19 to 12.19 m/s)
Rangability (Overall)
400:1
Measurement Parameters
Velocity, Volumetric, and Totalized Flow
Electronics
Enclosure
Epoxy-coated aluminum weatherproof Type
4X/IP67
Dimensions
6.6 x 5.0 x 2.4in (168 x 128 x 61mm)
Weight: 3.5 lbs/1.5kg
Channels
One channel
Display
Graphic LCD (128 x 64 pixels)
Keypad
Six-button keypad, for full functionality operation
Error Display Indicator
• Green or red light
Power Supplies
• Standard: 85 to 265 VAC, 50/60 Hz
• Optional: 12 to 28 VDC, ± 5%
Power Consumption
10 Watts in rush
5 Watts normal operation
Operating Temperature
-4°F to 131°F (�?0°C to 55°C)
Storage Temperature
�?0°F to 158°F (�?0°C to 70°C)
Outputs (Based on Configuration)
• 4-20mA (24VDC powered, 600Ω maximum load,
1500 VDC Isolation)
• Frequency, Pulse, Alarm (Passive output,
100VDC, 1A/1W maximum, 1500 VDC isolation)
• HART (FSK modulation, Category Flow, Protocol
Version 7.5, Device Revision 2, MFG ID 157,
Device Type Code 127, Number of device
variables 34)
• Modbus/RS485 (Half-duplex, 1500 VDC Isolation)
Analog outputs Namur NE 43 compliant
Certification
CE, UL, CSA, MCert approval pending
Clamp-On Ultrasonic Flow Transducers
Temperature Ranges
• Standard: -40°F to 302°F (-40°C to 150°C)
• Optional: -328°F to 752°F (-200°C to 400°C)
See specific transducer for exact temperature range.
Mounting Fixture
Anodized aluminum with stainless steel strapping
Couplant
Solid couplant standard
Rating
Standard: General purpose (IP66 or IP68)
See transducer for exact rating